Need to change the battery on your Guardian Lynx Panel? First, make sure your system is disarmed, and then place your system on test mode. Watch the video below for a few additional steps and then you’re all set!
To replace your panel’s battery, please follow these steps:
- Log in to your Guardian Protection account.
- Select System Info and then select Test My System.
- Disarm your system.
- Remove the AC Adaptor from the outlet.
- Insert a screwdriver at the top left and right of your panel to wedge it open.
- Pull the white connector from the battery panel.
- Use a Phillips-head screwdriver to remove the screw that secures the battery retainer.
- Remove the battery retainer.
- Replace the batteries. It will connect to either the two- or three-position connector.
- Reconnect the battery retainer.
- Swing the panel back up and lock it into place.
- Plug the AC Adaptor back into the lower plug outlet, screwing the screw back in.
- Test your system to make sure it is working correctly.
- Take your system out of test mode.